Evolution for your Demand
PIR Camera
This PIR CCD camera is a motion-activated camera that incorporates a CCD camera with a PIR motion sensor. It can be used as an accessory of an alarm system or a standalone monitoring device. You can also use this PIR camera to switch on a lamp when any movement is detected.
1/3" SONY Color Super HAD CCD sensor
Min.Illumination: 0.5Lux / F2.0
S/N ratio more than 48dB
PIR detection zone for 100° with 10 meters (25 °C)
AC125V / 10A (max) lamp control loading
4 type PIR active time, 10, 30, 120 sec. & always-on
Lamp control (1,250 W max)
Alarm output (N.C. / N.O.)
Pick-up Element 1/3" SONY Color Super HAD CCD sensor
Resolution Standard
Min. Illumination 0.5Lux / F2.0
Number of Pixel 510(H) x 492(V) <NTSC> / 500(H) x 582(V) <PAL>
S/N Ratio More than 48dB (AGC off)
Microphone Yes
Electronic Shutter 1/60 (1/50) to 1/100,000 sec
White Balance ATW
Lens f3.7mm / F2.0
Lens Angle 90°
Video Output 1.0Vp-p composite, 75Ω
Power Source( ± 10%) DC12V
Current Consumption 160mA
PIR Detection Range 100° with 10 meters long and 2 meters high (at 25°C)
Lamp Control Loading 1,250W (max)
PIR Alarm Output N.C./N.O., max loading 30Vdc, 0.5A
Operating Temperature 0℃ ~40℃(32℉ ~104℉)
Dimension(mm) 70(W) x 110(H) x 49(L)
Gross Weight(g) 317
* Designs and specifications are subject to change without notice.